This is going to be a large sale with many nice pieces. Listing includes several farmer closeouts and retirement lines! Items accepted on our lot from Monday, July 25th through Wednesday, August 10th (except Sunday, July 31). Nothing accepted on our lot after Wednesday, August 10th-NO EXCEPTIONS. 2 auction rings operating simultaneously-bring an extra bidder.

Friday, August 12th: Selling will be shop tools, hand tools, miscellaneous hayrack items, fencing supplies such as posts & panels, livestock feeders, pallet type items, etc.

Saturday, August 13th: Selling will be tractors, combines, heads, construction equipment, tillage equipment, grain handling equipment, livestock equipment such as manure spreaders, grinder mixers, etc., trucks, trailers and lawn & garden.

Call or email now to consign! 217-847-2160 - sold@sullivanauctioneers.com

Early consignments include:

Richard Dugger (217) 484-6360 (All of Mr. Dugger's machinery is in LIKE NEW condition!)
- '09 NH H7220 rotary disc mo-co, 10' cut, 540 PTO, SN Y9N081541
- '03 NH 258 Rolabar hay rake, dolly wheel kit, rubber mount teeth (extra pickup teeth kit for picking up alfalfa), SN 1063592
- '05 NH 570 square baler, wire tie with triple purpose bale chute, 51/2 P.U., SN 72349
- '09 NH 145 manure spreader, PTO drive & extra upper beater (brand new; never used), SN Y8N013777
- '04 Bush Hog RTS74-02 74" 3-pt. rotary tiller, 540 PTO, SN 12-1609
- '01 Killbros 390 gravity box with tarp, divided box, 24" side boards, lights, on Killbros 1386 running gear with 10.00x20 tires
- EZ Trail 40 cow hay/feeder-carrier
- (2) wooden calf self feeders

Paul Anderson (309) 337-1565
- '02 NH TJ375 4WD, 20.8x42 tires and duals, 4 remotes, 12-spd. trans., 3220 hrs., SN RVS001125
- C-IH Model 690 Conser-Till 7-shank disc-ripper, walking tandems with harrow
- C-IH NPX 5300 15-knife NH3 toolbar, Raven "Super Cooler", set up to pull two tanks, SN JFH 0030257
- Sunflower Mod. 5055-44 45' field cultivator, 6 sets of walking tandem axles & harrow (nice)
- M&W "Little Red Wagon" gravity wagon
- (4) 250-300 bu. gravity wagons
- Hutchison 10"x32' auger, 540 PTO
- Hutchison 13"x72' auger, 540 PTO
- JD 640 hay rake
- Kewanee 25' disc w/harrow
- Kewanee 11-shank chisel plow
- JD 400 15' rotary hoe
- JD 38 manure spreader
- White 588 plow
- Farmhand 7' mower, Mod. RC270
- 26' harrowgator
- DG "Cropsweeper" 8-row corn reel
- '89 NH L553 skid steer, 10-16.5NHS tires & 1865 hrs.
- Rhino Mod. SD15 15' batwing (w/8 hard laminated tires & 1000 PTO)
- 1,000 gal. water transport tank
- (2) hayracks
- (2) portable fuel tanks
- '95 Mack "CH 613" semi, 10-spd., E7-350 V Mac, 295/75R22.5 drive, 11R22.5 steer (outside wheels are aluminum), 152,673 miles
- '84" "Cornhusker 800" 42' hopper bottom, 66" sides, roll tarp, 11R24.5 tires
- Spectra 1242 "Grade Laser"

John Hempen (217) 440-3507
- '88 Case-IH 1620 axial flow combine, 23.1-26 & 11.2-24 tires, grain scan monitor & 2406 hrs.
- Case-IH 1020 15' grain head w/transport cart
- IHC 944 corn head
- '86 Case-IH 3394 MFWD, 18.4R42 & 16.9-28 tires (inside rear & front tires are like new), PS, 3 outlets (recent engine OH) 5640 hrs.
- Great Plains 12' no till drill w/harrow (nice!)
- Kewanee 21' hyd. fold #1020 disk with 9' spacing
- Wilrich 21' field cultivator, walking tandems, 3 bar spike tooth harrow
- '69 IHC 1600 Loadstar grain truck, 8.25-20 tires, 13 1/2' box, 4+2 trans.

Martin Kroencke Sullivan - Bill Sullivan (217) 440-8041 or bsullivan@martinbros.com
- '83 JD 2550 with JD 146 loader, independent control valve, 16.9-30 & 9.5-15 tires
- '82 JD 4640, 18.4-42 rear tires & duals, 14L-16 front tires, dual hydraulics, QR & 6800 hrs.
- '79 JD 4640, 20.8-38 rear tires & duals, 14L-16 front tires, dual hydraulics, QR & 3000 hrs. on OH
- '99 MF 4263, cab, new 18.4-34 tires, dual hydraulics, 540 & 1000 PTO & 2875 hrs.
- '01 Kubota BX2200 compact, 1100 hrs., dsl. eng., MFWD
- '67 JD 4020 dsl., PS, 18.4x34 & 10.00-16 tires with JD 48 loader
- '67 Ford 3000 utility tractor with loader, 3-pt., PTO & 5907 hrs.
- York 72" hyd. drive rotary broom (fits JD 5000 Series tractors)
- '87 C-IH 1020 20' platform
- '87 C-IH 1063 corn head
- 1991 Ford Aero Max L 9000 Semi Tractor (SN: 1FDYY95R7MVA247730), 656,023 miles, 10-speed, 855 Cummins, wet kit w/ hyd outlet, bull rack
- 1987 Wilson Muv-All Trailer (SN: 1W13H0X91H3303878), Model 4050G, 96" wide, overall length 42', 1200 lb. winch, no outriggers
- 1996 JD GT275 W/48" No meter
- 1993 JD 425 W/54" 845hrs
- 2006 Cub Cadet GT3200 W/54" 328hrs
- 1983 JD 116 W/38" no meter
- 2001 JD SST18 W/48" 275hrs
- 1994 JD 425 W/54" 1325hrs
- 2007 JD LA150 W/54" meter broken
- 02 Arctic Cat 500 4WD 4-wheeler

Jim Richers - Weaver, IA (319) 371-7639
- '74 Cat 951C crawler/loader, ROPS, PS, 13/4 yard bucket, 15" street pads, 5785 hrs., SN 86J3859
- '90 Flemming 8'x21' tandem axle contractor trailer, 25K, dual tandem axles, air brakes, ramps, pintle hitch
- '79 JD 90 skid steer, 50" bucket, 23-hp (less than 10 hrs. on engine), 1890 total time, SN 95015
- '96 Ford F250 XL 2WD pickup, auto, air, 125K miles, w/8' fiberglass utility box

Betty Fritz - Denmark, IA
- '64 IH 806 dsl., 3-pt., dual hyd., 18.4-34, 6900 hrs., SN 6875
- Near new Koyker 510 hyd. loader, 84" bucket (806 mounts)
- Koyker bale spear
- Farmall 560 gas, single hyd., after market 3-pt., 7400 hrs., SN 3455
- NI 352 manure spreader w/540 PTO & gate
- NI 402 hay rake
- JD 20' manual fold disk
- 20' harrowgator
- Woods 6' 3-pt. cutter
- Portable cattle feeder w/creep gates
- (5) large round bale rings

Randy Scheetz (309) 333-4150
- JD 630 27' disc w/3-bar coil tine harrow, 22" blades, 9" spacing (excellent!)
- '82 JD 4840, new radiator, new starter, new batteries, new tach in dash
- MF hay rake
- 3-pt. rear blade
- Killbros 385 wagon

Randy & Ronnie Scheetz (309) 333-4150 or (309) 337-0471
- Killbros 375 seed wagon
- JD 30' hyd. fold rotary hoe
- 250 bu. gravity wagon on gear

Dale Auwaerter (319) 470-1592
- '89 JD 8760 4WD, 24-spd., 18.4x42 tires & duals (inside tires like new/outside 50%+), 3 remotes, 1000 hrs. on a "new reman" engine, new injection pump, 8532 hrs., SN on reman eng.: SE6101H499082, SN on tractor: RW8760H001668 (sharp!)

Steve Haschemeyer (217) 242-9959
- Case-IH 3950 24' disc, 7 1/2" spacing (nice!)

Bob Tillman (217) 654-2261 Home - (309) 255-2994 Cell
- JD 1630 plowing disc, 12', 24" blades
- Case 6-18 onland plow, trip bottoms & coulters
- Danuser hyd. post driver
- Gas pump
- Elevator with gas motor
- Gravity wagon
- Grain spreader
- (5) hay panels
- Buzz saw
- Chemical mix tank

Larry Krebill (319) 835-5828
- '82 IHC 1460 combine

John Kirchner (319) 470-2505
- JD 750 no-till drill with harrow and grass seed attachment

Maurice Schmidt (217) 257-0668
- MDS single tine bale spear (quick attach)
- 300 gal. bulk tank with 12' hose & 2" valve

Heimer Construction Company, Inc. (573) 769-5515
- '94 Morgan Mustang portable grout pump w/pipe
- (2) 3-phase 75-hp 230/460 volt electric motors (new)
- Set of Grouser tracks for John Deere 24A skidsteer
- Melroe 2560 hydraulic breaker, SN 617900257
- Melroe 909 backhoe attachment w/16" bucket, SN 6561138-M-3802

Jerry Olson (309) 873-2250
- '56 International 300 utility tractor
- Woods 5' 3-pt. mower

Derek England (660) 397-4101
- Knight 3030 Reel Auggie mixer/feed wagon, 3 auger discharge, Weigh-Tronix scales (715), new knives and drive chains

Tom Lamm - Mt. Pleasant, IA (319) 551-9407
- '04 Ford F250 extended cab pickup, 4x4, automatic & air, 5.4 V8, 200,000 miles (white)
- '88 Trail King TK20 8'x24' gooseneck flatbed trailer, tandem axle duals, beavertail with ramps
- '00 Continental 8'x24' enclosed trailer with cargo doors, steel diamond plate floor
- '88 8'x20' triple axle deck over trailer with pintle hitch

Brian Schroeder (309) 267-6767
- MF 3-pt. sickle bar mower, 7' bar

Smith Equipment Co., Inc. (715) 665-2000
- Large qty. of new skid steer attachments to include: Hyd. augers, brush grapples, receiver plates and pallet forks.

Dan Markey (309) 333-6626
- Kelly 3-pt. backhoe attachment
- JD tractor dozer blade attachment
- JD 7' loader bucket

Marvin Williams (319) 524-6022 Home - (319) 470-0463 Cell
- AC 180 dsl. tractor, WF, 3-pt.
- 16' dual tandem axle trailer

John Michalewicz (319) 795-6355
- '00 Chevy 3500 P.O. 10' dump box, loaded
- '00 Toyota Tacoma SR5 V6, auto, 4WD, 117K

Craig Vorwaldt (319) 837-6557 Home - (319) 470-1392 Cell
- Bush Hog 2510 3-pt. rotary cutter

David Echternacht (660) 762-4668
- Sunflower 4233-23 disc chisel, walking tandem on main and wings, shedded (LIKE NEW-EXCELLENT CONDITION)

Randy Hawes (319) 470-9674
- Donahue gooseneck grain trailer
- 14' Fast Hitch field cultivator

Darrell Cockrum (217) 964-2433
- Ford 6' sickle bar mower

Kenny Althoff (217) 964-2333
- JD 8300 grain drill w/press wheels
- Ferguson "30" tractor
- Woods 4' rotary cutter
- Case 220 garden tractor
- '81 Gleaner M2 combine
- Gleaner 15' grain head
- Gleaner 6-30 corn head
- Head hauler

Dave Akers (319) 795-1442
- '95 JD 490E excavator, 28" street pads, 40" bucket, 2993 hrs. (SN FF490EX0257726)
- '98 Case 850G dozer, 24" pads, 10' blade, 6686 hrs. (SN JJG0254146)
- '05 Case 445 skidloader with bucket, 832 hrs., SN N4M401256

Crop Production Service - c/o Reggie DeSpain (309) 652-3694 Office - (309) 255-1606 Cell
- (2) 4250 13-knife bars with 20" coulters, 12" closing wheels, mole knifes and (2) Hiniker monitors
- (1) 4100 13-knife bar with 20" coulters, 12" closing wheels, mole knifes and Hiniker monitor
- (1) 4100 11-knife bar with 20" coulters, 12" closing wheels, mole knifes and Hiniker monitor

Leonard Musser (660) 341-0047
- '69 JD 4520, new clutch, SN 005706R
- '74 JD 4230, new tires, rebuilt hyd. pump, 7200 hrs., SN 18270R

William Owens (217) 430-0217
- '98 Dodge Ram 3500 pickup, 4WD, 5.9 dsl., 100,000 miles (runs good)

Bryce Volk - Mt. Sterling, IL (217) 257-6681
- '01 Chevrolet 2500 4x4 pickup, blue, 6.0L V8 & 103K miles - sells w/L-shaped fuel tank

Todd Houston (217) 242-1323
- '05 Krauss 7400 Disk 42', 24" blades, 9" spacing

Bill Radel (217) 357-1184
- Frontier RC 1072 3 pt. cutter (as is)
- Mayrath 51' 6" auger

Bob Shields (217) 440-6530
- Versatile 875 4WD tractor w/20.8x38 tires & duals (good rubber!), 5823 hrs. (VERY NICE VERSATILE!)
- 6' x 20' gooseneck trailer with ramps (with 2' sides)
- (4) 38.5 x 22.5 tires on 8 bolt rims
- (2) 16.5 x 16.1 knobby tires on 8 bolt rims

Mike Frazier (660) 341-5729 
- Mayrath 12" x 82' auger

Richard Loos (217) 936-2251
- Killbros gravity wagon

Adam Neisen (217) 430-2516
- '08 NH round baler with only 1300 bales!
- JD "B" tractor (runs)

Larry Brunk (319) 752-2598
- Hegner Multimax-18 Universal Precision Saw - made in Germany

LeRoy Yackley (573) 769-3940
- IHC 560 tractor
- (2) Schwartz wide front - one for JD & one for IHC
- 4" x 660' injection hose on Ag-Rain reel
- Deluxe seat
- Marvel 6' wide heavy duty tree cutter
- Flat storage auger (for loading out commercial flat storage)

Melvin Wetterich (217) 357-9319
- '72 Ford F 700 grain truck with 12' Knapheide box and Heil hoist

Darrel E. Cockrum (217) 964-2433 gcockrum@adams.net
- 6' Ford sickle bar mower, 3-pt. hitch for older Ford Tractors

Raymond Ferguson Estate (Items are on the lot - feel free to view at your convenience)
- IHC 656 gas tractor, hydro, 4568 hrs.
- Fiatt 90-90 dsl. tractor w/2502 hrs.
- GB 800 ldr. (brackets off IHC 656)
- '01 Dodge Ram 1500 pickup truck, ext. cab, auto, 78,869 miles
- '00 Dodge Ram 1500 pickup truck, ext. cab, auto, 103,336 miles
- '76 Ford F700 grain truck, 5-spd., 15' bed, 82,154 miles
- '74 Ford 700 grain truck, 5-spd., 15' bed, 52,317 miles
- '74 IHC grain truck, 5-spd., 13' bed, 53,891 miles
- '76 Gleaner L combine, 23.1-30 & 14L-16 tires, 1843 sep. & 3031 eng. hrs.
- Gleaner 16' grain platform
- Killbros 20' head trailer
- Spray Coupe Mod. 220 w/50' booms
- Wilrich 20' field cultivator
- Brillion 15' cultimulcher
- White 5100 6RN no-till planter
- (3) 14' hayrack wagons
- Bushnell gravity wagon
- MF 110 manure spreader
- Gehl 55 grinder mixer
- IHC 5100 grain drill
- JD 5-bottom plow
- Farm King gravity wagon
- DMI 11' chisel plow
- Danuser posthole digger with 15" auger
- NI 216 manure spreader
- Ford CL-20 skid steer
- Flare box wagon on running gear
- Servis 900 8' blade
- JD 7' sickle bar mower
- Flare box wagon with auger
- 6-bale hay trailer with dolly wheel
- 3-pt. bale fork
- 1500 gal. poly tank
- Bale fork for loader
- 100 gal. fuel transfer tank with hand pump
- Gehl 95 grinder mixer
- Yamaha golf cart
- Honda 200 SX 4 wheeler
- Suzuki FA50 scooter
- 30' Ford fld. cultivator
- Brillion rotary mower 6'
- JD 6 row cultivator
- Krause 20' disk
- JD 14' disk
- '77 Model WW 16' livestock trailer
- Ford 350 grain truck
- '68 AC180 dsl. tractor
- Bison S-650G tractor with Woods L59 belly mower
- 24' harrowgator
- (2) 500 gal. fuel barrels with pump
- White 6 row cultivator
- NI hay rake
- JD 13' brush disk

The Former Ames Construction - State Central Bank, owner (items are on our lot - feel free to view at your convenience)
- Case 580 Super K backhoe, Extend-A-Hoe, 24" bucket, 7489 hrs.
- Case 580E backhoe, Extend-A-Hoe, 36" bucket, 4465 hrs.
- Case 1845C skid steer loader, 6' bucket, 2760 hrs.
- Sky Jack 3219 scissor lift
- Sky Jack 3226 scissor lift
- Cat forklift, as is
- '03 Ford Windstar minivan
- '98 Ford F150 2WD pickup, auto, does not run
- '04 Ford F150 extended cab pickup, auto, front end has some issues
- '03 Chevrolet Malibu, as is
- '02 Chrysler Concord
- Fruehauf 40' van trailer
- Fruehauf 35' van trailer
- 5'x8' 2-wheel trailer
- 26' job site trailer
- 12' tool trailer
- (2) GE transformers
- Knaack & Ensley job boxes
- Steel shelving
- Steel cart on wheels
- 2-wheel barrel cart
- Also selling: Several power & hand tools

Todd Koch - (217) 653-7505
- '97 Mack semi tractor, Fuller 9 spd. trans., 350 engine, alum. rims, this truck has had a lot of work done to it recently and is absolutely ready to go! Give Todd a call for details.
- '98 Advantage 39' alum. frameless dump trailer, alum. rims, roll tarp, sharp!
- '85 Int. semi tractor, low mileage and mechanically sound.
- '79 Merritt 38' hopper bottom grain trailer with new roll tarp.

Tom Wilson Estate, Nauvoo, IL
- '11 JD 825i XUV 4WD Gator with heavy duty front brush guard, only 1 month old and absolutely like new!
- MF 35 utility tractor with loader
- Ford 700 grain truck
- JD 60 2 cyl. tractor
- MF 750 combine with heads
- JD 7000 4RW planter
- (2) gravity flow wagons
- Artsway grinder mixer
- VW convertible
- Ford Bronco
- Running gear
- Few other misc. items

James Covert (309) 221-0478
- '99 Dodge 2500 pickup truck
- '74 Chevrolet C65 tandem grain truck
- Befco 10 wheel hay rake
- Several fence anchors

Miles Wellman (319) 470-0287
- '98 24' Gooseneck flatbed trailer, extra heavy axles and oak wooden floor, Steffensmeier Manufacturing

Mike Decounter (309) 331-4013
- (2) gravity flow wagons

Ryan Boley (319) 795-3574
- '11 PJ 40' (35 plus 5) dual tandem flatbed trailer (new!).

Bob Breckenkamp (217) 242-6293 & Don Breckenkamp (217) 242-2137
- 1987 International F9370 converted semi, 9-spd., 850 Cummins 18' aluminum bed, head hoist, roll tarp & 4 new caps.
- 1989 Freightliner converted semi, 13-spd., 855 Cummins, 400-hp, 18' aluminum bed, head hoist, roll tarp & good rubber
- JD 900 9-shank V-ripper
- Hutchison 10"x30' transport auger

Dean Ruebush (309) 337-4225
- (5) Neco 6" cross augers with Hutchinson drop boots
- 35' auger
- 38' auger
- (2) 44' augers
- 48' auger

Brad Ufkes (309) 224-3590
- '06 Arctic Cat 400 4x4 automatic
- Category 1 rear-mount 7' blade

Kent Dusterhaus (217) 653-6580
- Westfield MK 100-71 auger
- JD 1210A 400-bushel auger wagon

Red Driskell (309) 652-3763
- New homemade wooden workbench

Thelma Reische - For info.: Don Wilkerson (217) 653-0482
- '76 JD 4430, 6190 hrs. (OH at 5400 hrs.), QR trans.
- JD 148 loader
- (10) JD weights
- Set of JD starter weights
- Woods BB 7200 rotary cutter
- JD 1010 18 1/2' field cultivator
- 3-pt. seeder
- Woods 8' 3-pt. blade
- 3-pt. bale spear
- Danuser post digger
- 2' extension for Danuser digger
- 18" bit for Danuser digger

Bruce Spangler (309) 926-7321
- '96 "Diamond D" 7'x20' gooseneck livestock trailer with one divide gate

Arlyn Musselman (217) 755-4289
- 14' homemade HD 4-wheel trailer with lights
- 3-pt. blade

Doug Marhsall (309) 337-1347
- '08 5'x8' utility trailer

Seaver Farms - Jeff (309) 313-2087
- '83 Case 2390 tractor, cab, 18.4R38 rear tires & axle mount duals, 10.00-20 front tires, only 5120 hrs.

Albert Renken (309) 337-2742
- International 6000 10' disc chisel with leveling bar

Alter Glass
Scott Alter, Mt. Pleasant, IA (319) 537-0010
- Sommer and Maca 106" belt sander
- 8 sections of Bil-Jax scaffolding
- 6 aluminum scaffold planks
- Masons scaffolding
- Knack job boxes
- Ladders
- DeWalt miter saw and other power tools & much more

Steve Otte Estate
- '08 Gleaner R65 4WD combine (SNR65HT62120), 917 engine hrs., 682 sep. hrs., with mapping and lateral tilt (very nice machine!)
- '03 Gleaner 3000 6-30 corn head (SN630RHMM2758)
- '02 Gleaner 25' grain platform (SN25FHL 84132)

Jim Rich (309) 221-6312
- New Idea #217 manure spreader, power take off with upper cylinder

Kevin & Phillip Westfall (319) 372-4126
- JD 925 grain head

John Wenke (319) 371-9517
- '81 GMC grain truck with 18' steel bed, twin screw

Tom Tygrett (309) 337-0420
- Parker 6000 425-bu. tandem axle auger wagon

Aldie Land (319) 470-9501
- Allis Chalmers "C", w/WF & Woods belly mower

Hubert Staff (217) 430-2453
- '91 Bee 2HS horse trailer w/tack room
- (8) JD suitcase weights

Lester Harnetiaux (217) 847-3869
- IHC 963 corn head

Elaine Schenk (217) 453-2394
- JD 7' 3-pt. sickle mower
- Sweep auger
- Electric motors

Brad Shaw (217) 755-4372
- Mayrath 8"x56' grain auger
- Cattle feeder
- Gravity wagon
- Feed King cattle feeder

Mike Kost (309) 333-5490
- '71 Ford F700 grain truck, 5+2 trans., 13 1/2 bed
- '72 Ford F600 grain truck, 4+2 trans., 13 1/2 bed

Gene Thorman (309) 333-0354
- JD 1710A disc chisel

Randy Hawes (319) 470-9674
- 16' Donahue gooseneck grain trailer

Kevin Schmitz (309) 221-8069
- '78 IHC 2575 tandem grain truck, 20' box, 9-spd. trans., 855 Cummins, tarp, 136K miles
- '79 Danahue 6x20 livestock trailer

Jerry Young (319) 795-3682
- IHC  4130 skid steer, 1075 hrs., runs good

Jerry Erlandson (309) 333-8151
- '99 Wilson 41' hopper bottom grain trailer (nice!)
- Case-IH 8330 mo-co

Tim Bolton (309) 337-4819
- IHC 1190 mo-co

Kelvin Hufendick (217) 964-2550 - (217) 440-9812
- (2) JD 116 lawn mowers
- JD 116 lawn mower parts, thatcher, etc.

Nick Kirchner (319) 561-1204
- '71 IHC 966 dsl., new torque 800 hrs. ago, 540+ 1000 PTO, 2-hyd.
- '65 IHC 706 gas, fast hitch, TA out, new brakes, clutch and rear main seals
- Kuhn 3-pt. 9' rotary disc mower
- Bush Hog 7' 3-pt. cutter

Paul Tieman (217) 656-3712
- Pair of Knapheide "Roughneck" 8' toolboxes (excellent condition!)

Gary Wilkerson (217) 257-5748
- JD 275 rotary disc mower

Robert Hartweg (217) 847-3404
- 20' weed wiper

Logan Harl (309) 224-4022
- Dayton 3/4 electric motor (runs good!)

Earnest Horton (309) 653-1228
- Ficklin gravity wagon

George Newman (319) 670-9204
- Artsway 450 grinder mixer
- IHC 5100 grain drill
- Quick hitch
- C-IH 8460 baler
- Du-All 3-pt. blade
- Cattle chute
- 3-pt. log splitter

Scott Kirby (309) 337-4193
- Killbros 300-bu. gravity wagon on gooseneck

Dale Mulch (309) 337-3186
- '09 Polaris 50cc 4-wheeler (excellent - low time!)

John Wright (217) 357-2421
- 24' 6" unloading auger with well

Steve Harris (217) 357-4250
- 18' 6" unloading auger with well

George Torrence (309) 337-0574
- Hobbs 1000 irrigation gun w/1,000' hose reel
- Caprari pump with suction hose
- (2) running gears
- (2) NH3 tanks/gears
- Tillit 3-pt. roto-tiller
- 3-pt. dirt bucket

Dale Cramer (309) 776-3043
- '95 Corn Pro 6x16 livestock gooseneck trailer

Ken Sill (309) 219-3274
- Gravity wagon

Kevin Phillips Westfall (319) 372-5449
- JD 925 25' flex head

Richard Loose (217) 936-2251
- Killbros gravity wagon w/hyd. seed auger

Charles Fink (217) 430-3756
- Gravity wagon on gear

Wayne Hanks (217) 845-4361
- Glencoe 16' 3-pt. field cultivator

Steve Hall (309) 337-4627
- '83 IHC 1460 combine, excellent condition, 4300 hours (this is a VERY NICE well maintained machine!)
- IHC 820 15' grain platform
Both Always Shedded!

Mark Reynolds (217) 653-1134
- 475 Killbros grain cart

Stanley Wilson (573) 288-5541
- 72 GMC tandem truck, 13-spd., Detroit dsl., 18' box

Byron Thompson (217) 430-4702
- '96 Peterbilt 378 semi, day cab, Cat 380-hp, 10-spd., 4:11 rear, 24.5 tires, Lo Pro, air ride & 815,000±

Allen Clemens (309) 221-8758
- Great Plains solid stand PD15 15' no-till drill with rear harrow

Bryan Arnold (309) 337-1437
- '02 JD 2700 disc ripper, 9-shanks on 24" spacing, 1 season on all new bearings and disc blades, 10" points, rear conditioner.  (Field ready.)
- '88 Dorsey 48' van trailer
- Gates Harrow 16' heavy duty coin tine harrow for disc ripper

Kenny Gooding (217) 593-7218
- IHC 560 gas tractor, WF, fast hitch, recent OH, sells complete with loader.  Owner has owned this tractor for over 20 years!!

Dennis Schulte (319) 795-1094
- Farmall M

John Wenke (319) 371-9517
- '81 GMC 6500 grain truck, 13-spd., 466 FI dsl. eng.

Russell McVeigh (217) 847-3879
- Westfield 6x32 auger w/5-hp motor
- Mayrath 6x61 auger w/electric motor

Terry Monroe (309) 313-1350
- Killbros 475 grain cart (new auger 3 yrs. ago)

Veith Farms (217) 773-2480
- (2) Killbros 350 gravity wagon (one on Killbros gear; one on John Deere gear)

Roger Sutter (217) 430-2003
- '92 International 9400 semi, 3406 Cat, air ride, 10-spd. trans., 946K miles

Sherman McVeigh (217) 847-2490
- MK 80 8"x61' auger, swing-away

Janice Cochenhour (660) 945-3846
- AC WD 45

Gary Anderson (217) 219-3989
- '52 Ford 8N
- 3-pt. 6' blade

Lionel Hammond (573) 406-3877
- '95 Jamco 6-horse trailer with tack room (excellent condition!)

Jim Rich (309) 221-6312
- NI 217 manure spreader

Greg Billingsley (217) 430-8757
- Honda 300 4-wheeler
- Troy Bilt tiller
- "White" tiller
- Stihl chain saw
- NH 316 wire tie square baler (excellent!)
- NH 1002 "Stackliner" bale stacker (excellent!)
- Top Aire 1000 gal. sprayer w/35' booms

Rodney Martin (309) 221-9397
- NH 355 mix mill w/scales

James Clark (319) 524-3934
- Woods 3-pt. finishing mower
- Golf course spray cart

Harold Sherrick (217) 440-5896
- NI 201 manure spreader

Lane & Lance Roskamp (217) 242-4531
- (2) Kasten 14' silage wagon

Evelyn Yard - C/O Karl Yard (217) 659-3920
- Danuser posthole digger
- 500-gal. pull-type sprayer
- Wagon hoist

Gary Kline (309) 337-5543
- '99 Pro Stock 16' bumper hitch livestock trailer

Steve Stratton (217) 985-4241
- JD #27 stalk shredder

Bill Luebke (217) 847-3247
- '97 Ford F150 2WD pickup, auto

Shawn Flesner (217) 257-1271
- '96 Aluma Tech 39' aluminum dump trailer

Lawrence Volk (217) 773-2985
- NH 258 hay rake
- IH 12' chisel plow
- JD 12' chisel plow

Gale Althide 217-743-5581
- DMI cushion bumper
- Behlen hog panels
- Hog pipe gates
- DJ moisture tester

Lynn St. Clair (660) 341-0579
- Kewanee 11-shank chisel plow

Roger Brink (217) 256-4455
- "Terrain Tough" food plot disc

Janice Fink (217) 430-3756
- Oliver 10-shank disk chisel

Robert Harden (309) 746-6226
- JD 443 corn head "Low-tin"

Robert Kline (309) 837-3276
- Hesston 2000-1000 silage chopper w/2-row head
- Calhoun 351 silage wagon

Ray Muegge (217) 936-2156
- Kelderman 10-wheel rake
- (2) Kasten silage wagons

Alvie Land (319) 470-9501
- AC tractor w/belly mower

Gene Hartweg (217) 746-5141
- JD 750 15' no-till drill, marker, dolly wheels

Wayne Bray (319) 759-8872
- 500-gal. pull-type sprayer

Carroll Garkie (573) 406-9613
- Kasten '20' silage wagon
- JD 716 silage wagon
- JD side delivery 660 hay rake
- Hampton feed wagon
- Bearcat mix mill

Tom Scheetz (217) 453-6490
- JD 1065 running gear (as is)
- JD silage hay head

Dan Hawes (319) 795-6482
- JD quick hitch

Ron Cramer (309) 333-5249
- Butler 180 feed wagon

Terry Pabel (217) 696-2498
- MF 185 dsl. tractor w/Bush Hog 3000 loader w/5004 hrs.
- IHC manure spreader
- AC 7' sickle mower
- 6' 3-pt. rotary cutter

Joe & Bill Wilkens (309) 337-5928
- IHC 1190 mower-conditioner
- (4) 205x60R15 tires/rims
- (2) 18.4x26 MFWD tires (good)

Travis Schulte (309) 221-3609
- '03 TN65 New Holland Tractor with 215 hours, 3 hydraulics, 540 PTO, 16.9-30 rear tires, 9.5-15 front tires, SN 001297301

Kratzer Motors (319) 524-5581
- '97 Ford 1-ton dump truck

Secured creditors and others will sell:
- JD 3950 silage chopper, 1000 PTO, SN E03950X985675
- JD 2RW silage head, SN E000RCX916878
- JD 7' hay silage head, SN 986589
- Case-IH 561 round baler, 1000 PTO, SN CFH0156192
- 1995 Jamco 6-horse trailer (very nice condition)
- (7) 8' cement feed bunks
- (9) 12' cement feed bunks
- (3) 16' pipe gates
- (4) 12' corral panels
- (1) 10' corral panel
- (1) 12' panel gate
- (2) 16' hog gates
- (1) 20' culvert (24")
- (1) 15' culvert (24")
- Hegner "Multi-Max 18" Universal precision saw
- MM "R" tractor
- F-14 tractor
- (2) F-20 tractors
- AC "WC"
- JD "A"
- Full set of steel wheels for AC "B"
- Rear steel for F-20
- 24' Werner extension ladder
- 32' Werner extension ladder
- 24" excavator bucket
- Mechanical excavator thumb
- Poly feed bunk
- Brillion 24' cultimulcher
- Polaris Ranger 4x4 425-hrs.
- Honda 230F dirt bike
- (2) 30.5x32 tires & rims (good)
- JD 443 corn head

All items sell without reserve to the highest bidder, with no minimums or buy backs. Off highway parking-please follow parking attendants' instructions! Shuttle will run from parking area to office. Lunch by Sly Fox. Hope to see you August 12th & 13th! List subject to change.