Loading Events
  • This event has passed.
  • STARTAug 11th - 9:00am

  • VENUEMt. Sterling Radiator & Welding Inc.

Mt. Sterling Radiator & Welding Inc. Complete Liquidation Auction

Friday, August 11, 2017 at 9:00 A.M.

SOLD!

Auction to be held onsite at 105 SW Cross St., Mt. Sterling, IL

REAL ESTATE (Sells at 10:00 A.M.): Consists of a 36’x40’ concrete block building with new rubber roof (10 yr warranty), concrete floor, 12’x12’ overhead door, smaller sliding door, bathroom and hanging natural gas furnace. The building is situated on a 60’x120’ lot and is ideally located just south of Hwy 24 at 105 SW Cross Street, Mt. Sterling, Illinois.

Don’t miss this opportunity to purchase this commercial real estate, which offers many opportunities.

Method & Terms: Immediately following the auction, the successful buyer shall enter into a written purchase agreement with the sellers and pay 10% of the bid price as earnest money. The balance of the bid price due in approximately 30 days, on or before September 15, 2017 upon delivery of a deed. The real estate taxes will be prorated to the date of closing. Full possession will be given at the time of closing.

All announcements sale day shall take precedence over any prior advertising either written or oral. The information in this brochure is believed to be accurate; however, no liability for its accuracy, errors or omissions is assumed. All lines drawn on maps, photographs, etc. are approximate. Buyers should verify the information to their satisfaction. There are no expressed or implied warranties pertaining to the property. This real estate is being sold “as is”.

AUCTIONEERS’ NOTE: After 20 successful years in business, Gary & Susan Fry are selling the complete contents of their radiator, welding and repair business at public auction. You will find all the equipment to be in very good and usable condition. For any questions on the equipment contact Gary at 217-257-2601. Lunch will be available.

PERSONAL PROPERTY

PORTABLE BUILDING, CARGO TRAILER & FORKLIFT

  • 12’x14’ Portable building with metal sides and roof, finished interior, counter, electric heater and window ac
  • 2008 Hallmark 16’ tandem axle enclosed cargo trailer w/ fold down ramp
  • Pettibone Mercury model#30-GS4 LP gas forklift with 6.90-9NHS front tires, 5.00-8NHS rear tires, 3000LB lift (SN:9658)

LARGE SHOP TOOLS

  • Lincoln Ranger 8 portable welder with Onan 16HP gas engine
  • Lincoln Square Wave 175 stick and tig welder with foot control
  • Lincoln Electric SP-125+ mig welder
  • Snap-On MM250SL mig welder (needs some repair)
  • Miller Spoolmatic 30A air cooled spool gun
  • Miller WC-115A weld control box
  • 50’ lead wire
  • Milwaukee 2H vertical mill w/ 6000Lbs, 240/3 phase (table feed doesn’t work)
  • Bradford mill w/ 16” swing, 9’ bed, 220 single phase, steady rest, tail stock
  • Hydraulic tubing bender (up to 2” pipe)
  • 4’ metal brake with 20 ton jack
  • 4’ flat metal roller w/ round tubing roller attachment
  • 4’x7’x20” stainless steel radiator check tank w/ air over hydraulic lift
  • Natural gas and compressed air radiator torch
  • 10’ jib crane w/ ¼ ton hoist (bolted to floor)
  • 5’x5’x3’ radiator flush booth
  • Magnaforce vertical air compressor w/ 5HP electric motor, 220 single phase and 60 gal. tank
  • Gardner Denver vertical air compressor w/ 5HP electric motor, 220 single phase, 80 gal. tank
  • South bend 13”x36” metal lathe, 3 & 4 jaw chuck, face plate, 240/3 phase
  • Lempco table resurfacer w/ 14” surface wheel
  • (2) Smith acetylene torch outfits (1 on heavy duty cart)
  • Homemade electric hydraulic power unit (to drive hydraulic cylinders)
  • Continental 30 ton shop press

POWER TOOLS

  • Craftsman 20” drill press, 2HP, 12 speed, ¾” chuck, 45 degree tilt
  • Tristar bench drill press, 5 speed, 1⁄3 HP
  • Delco cut-off saw
  • Greenlee metal band cutoff saw
  • Makita angle grinder
  • Milton Vise on stand
  • Black and Decker circular saw
  • 1⁄2 HP 2-wheel grinder
  • Large right angle electric grinder
  • Craftsman ½” Electric drill
  • Sioux ½” electric impact wrench
  • Pneumatic grinder cut off tool
  • Homemade transmission jack
  • 4 ½” grinder
  • Other various power tools to include   drills, grinders, etc.

WORK BENCHES & TOOL CHESTS

  • 4’ welding table w/ heavy vise
  • 42” steel welding table w/ vise
  • 6’ metal workbench w/ small 2-wheel grinder
  • 20 ton bottle jack
  • Mac 7-drawer tool chest
  • 10-drawer tool chest

MISC. TOOLS & ITEMS

  • Portable smoke filter
  • Porta Power
  • Metal bander kit
  • Daton pneumatic die grinder
  • Snap-On pneumatic 3/8 drive impact
  • Napa ½” air impact
  • HB and other pipe cutters
  • Little Giant tap and die set, up to 1”
  • Metal reemers ¼” – 2”
  • Dewalt 18v cordless drill
  • 600psi Ryobi electric pressure washer
  • Gear pullers
  • Handyman jack
  • Vehicle toe bar
  • Floor jack
  • Mac timing light
  • Inside and outside micrometers and Starrett Indicator
  • Snap gauges
  • Number engine stamps
  • Miller Falls surface gauge
  • Easy outs/extractors
  • Stant radiator pressure tester
  • ¾ drive socket set
  • Tap and die sets
  • Mac ratchet torque wrench
  • Aluminum pipe wrenches (up to 20”)
  • Air hose
  • Metal drill bits up to 2”
  • Various welding tools to include vise grips, c-clamps, hammers, etc.
  • Squirrel cage shop fan
  • Homemade radiator stand
  • Pry bar
  • Various extension cords
  • Assortment bolts
  • Shop-Vac
  • 8’ fiberglass stepladder
  • Battery chargers
  • Welding helmets
  • Band saw blades
  • Various assortment of sockets including impact
  • Large assortment of open box end wrenches both standard and metric
  • Log chains
  • Come-alongs
  • Adjustable wrenches
  • Fire extinguisher
  • Sledge hammers
  • Small amount of steel stock including tubing, angled, flat, etc.
  • Apartment size refrigerator
  • Shelving
  • Various radiator parts and fittings
  • Radiator flush wand and air hose
  • Metal saw horses
  • Screw and jack stands
  • Various hand tools
  • Welding rods

Mt. Sterling Radiator & Welding Inc.

REPRESENTING ATTORNEY: Rick Zimmerman 132 E Main St, Mt Sterling, IL 62353 • Ph: (217) 773-3814

 

Print Friendly

Details

Date:
August 11, 2017
Time:
9:00 am - 11:00 pm
Categories:
,

Venue

Mt. Sterling Radiator & Welding Inc.
105 SW Cross St., Mt. Sterling, IL, 62353, United States.
+ Google Map
EVENT MAP